Question 1

How do I change the Pin Number or add a Pin Number to the alarm system

Accepted Answer

To add a Pin Number to your alarm system follow the the following programming sequence:

Press you current Pin number followed by Enter User Number 02 – key in the 4 digit pin number Press enter and your done!

Question 2

How Do I Add A Sensor

Accepted Answer

If you purchased extra sensors when you purchased your Nomad Alarm System. – They will come to you already programmed in for you!

If you have  individually purchased additional motion sensors, door sensors and smoke detectors. To add the sensors to you DIY Alarm System please follow the instructions below. Firstly, here is an explanation of the keypad buttons and what they mean.

How to Add a Motion Detector or Door Sensor to your Nomad Alarm System.

1 – Settings > Your Pin Number > Enter/#
2 – Arrow down to 5. Device Set > # >1.Zone > # > 1.WL.Register ># > 1. By Code Learn > #
3 – Arrow down to the next available zone > # > Trigger the device – Success > # */Back to back out
4 – Keep pushing Back till you exit programming.
5 – Test your new sensor

NOTE: When testing Motion Sensors will require 5 minutes of no detection before setting themselves for a alarm (this is a battery saving method which is common on all wireless sensors)

Question 3

Can I buy a Nomad Alarm System without the SMS Monitoring Service

Accepted Answer

YES – you can buy a Nomad Alarm System without the SMS Monitoring service :
You just need to X out/delete it after you have added it to the shopping cart.

Question 4

How do I change the Battery

Accepted Answer

To change a Motion Sensor Battery Take the cover of the sensor by inserting a small flat head screw driver Or Watch our you tube video on how to change a motion sensor or door sensor battery www.nomadalarms.com.au/video-support/

Question 5

How do I cancel my SMS Monitoring Service

Accepted Answer

The SMS Monitoring Service is enable by subscriptions from your credit card. To cancel your subscription simply log into the Nomad Alarms website using username an password that you set up on Check out. 
Choose Subscription from the My Account Menu, Then click cancel to cancel your Subscription. 
After a few minutes you will stop receiving SMS alarm messages from your Nomad Alarm System.

Phone Paul: 0421455100

Australia’s Alarm System Supplier

Video Support for your Nomad Alarm System: